Lycom DT-125 1 x M.2 NVME and 2 x M.2 SATA M.2 SSD PCIe 3.0 x4 Low Profile Host Adapter Card, compatible to Windows/Mac/Linux PC

Lycom DT-125 PCIe Adapter Card – 1x M.2 NVMe + 2x M.2 SATA (PCIe 3.0 x4, Low Profile)

Add serious internal SSD expansion to your desktop or workstation with the Lycom DT-125 host adapter card. It lets you install one M.2 NVMe (PCIe) SSD plus two M.2 SATA SSDs on a single PCIe card, making it a great upgrade for storage-heavy builds, scratch disks, labs, or compact systems where drive bays are limited.

Designed in a low-profile PCIe form factor, the DT-125 fits many small form factor (SFF) PCs and servers, while still supporting common M.2 lengths (including longer 22110 modules). It’s also OS-independent with no drivers required for the card itself.

Key Features:

• Supports 1x M.2 NVMe (PCIe) SSD plus 2x M.2 SATA SSDs on one adapter card
• PCIe 3.0 x4 host interface (works in x4/x8/x16 physical slots)
• Fits multiple M.2 lengths: 42mm / 60mm / 80mm / 110mm (2242 / 2260 / 2280 / 22110)
• Low-profile design for SFF systems (brackets typically included for standard + low-profile installs)
• No driver required for the card itself (storage recognition depends on your OS and system support)
• Optional auxiliary power input (4-pin Molex) for extra stability when powering multiple SSDs

Included:

• 1 x Lycom DT-125 PCIe adapter card
• Low-profile bracket (and standard bracket where supplied)

Product Q&A

Q: Can I use NVMe and SATA M.2 drives at the same time?

A: Yes. The DT-125 is designed to run one NVMe (PCIe) M.2 SSD and two SATA M.2 SSDs simultaneously.

Q: What M.2 sizes are supported?

A: It supports common M.2 lengths including 2242, 2260, 2280, and 22110. Make sure your SSDs match the correct interface type (NVMe for the NVMe slot; SATA for the SATA slots).

Q: Will this work in any PCIe slot?

A: It requires a PCIe slot with at least x4 lanes available. It will physically fit in x4/x8/x16 slots, but performance depends on your motherboard’s lane allocation.

Q: Do I need drivers?

A: No drivers are needed for the adapter card itself. Your operating system must support NVMe and SATA storage normally (Windows, macOS, and Linux generally do).

Q: Can I boot from the NVMe drive installed on this card?

A: Boot support depends on your computer. Many modern UEFI motherboards support NVMe boot, while some older systems may require a firmware update or may not boot from NVMe.

Specifications

• Host Interface: PCIe 3.0 x4
• M.2 Slots: 1 x M.2 NVMe (PCIe) + 2 x M.2 SATA
• Supported M.2 Lengths: 2242 / 2260 / 2280 / 22110
• Form Factor: Low-profile PCIe card
• Power: Powered from PCIe slot; optional 4-pin Molex auxiliary power input
• Driver Requirement: None for the card (OS storage support required)

Compatibility

• Desktop PCs, workstations, and servers with an available PCIe x4/x8/x16 slot
• Supports Windows, macOS, and Linux systems (OS must support NVMe/SATA storage)
• NVMe boot support depends on your system’s firmware/UEFI (not guaranteed on older machines)